Midas PRO6 Owner's Manual page 91

About the Patching screen
Line IO option
The Line IO device is the DL451 Modular I/O.
For more information, go to our website
www.midasconsoles.com.
Generic AES50 option
The Generic AES50 device is an audio only device that is
used to represent the inputs and outputs of any third party
AES50 device.
DN9696 option
The DN9696 device is the Klark Teknik DN9696 Recorder.
Use up to four of these devices (with IDs 1 to 4) to
represent the four AES50 ports for up to 96 channels of
recording/playback.
For more information, go to our website
www.klarkteknik.com.
DL351A, DL351B, DL451C and Dl351D options
These are the four devices that
make up the DL351 Modular I/O,
and they are known as "DL351A",
"DL351B", "DL351C" and "Dl351D".
Dl351D is not displayed.
For more information, go to our
website www.midasconsoles.com.
Monitor option
The Monitor device represents the control surface monitor
input and output XLRs. These are also shown on the Mon.
tab of both the From and To sections of the Patching
screen; Talk Input Source and Talkback Input Source
in the From section and all of those shown in the To
section.
Normally, these are always connected to the above patch connectors on the Mon. tabs.
However, LFE and centre can be used as assignable outputs if surround monitoring is
not required.
MS Cable Red option
The MS Cable Red device is used to specify which port is to be used as a dual
redundant port to a DL431 Mic Splitter.
Line Io Cable Red option
This Line Io Cable Red device is used to specify which port is to be used as a dual
redundant port to a DL451 Modular I/O.
PRO6 Live Audio System
Owner's Manual
65