Parameters Affected By Scope; Introduction - Midas PRO6 Owner's Manual

Live audio system

Hide thumbs Also See for PRO6:

Table of Contents

Appendix K: Parameters Affected By

This appendix shows the parameters affected by scope.

Note: The parameter areas for the scopes (store and recall) and the safes are basically

the same. However, the way they are presented in their respective appendices is

different. This may provide you with a useful alternative when referring to this

material, should you prefer one more than the other (see Appendix M "Parameters

Protected By Safes" on page 427).

This appendix shows you which parameters are or are not scoped when you select the

parameter sections in the channels, buses, groups, effects and GEQs on the Store

Scope and Recall Scope screens.

There is a section for each area (channel, bus, group, effect and GEQ) on the scope

screen, and these sections are then subdivided according to the processing areas in the

fast/channel strips on the control surface and GUI.

The following diagram shows the Store Scope and Recall Scope screens (with no

parameter sections selected), and the table to the right shows what the symbols in

each section mean. In the table the orange letters in the Ref. column are used in the

tables throughout this appendix to help you quickly identify the parameter sections.

XL8 Live Performance System

Owner's Manual

Troubleshooting