Midas PRO6 Owner's Manual page 186

160
Working with VCA/POP groups
When you recall a group its input channel members are unfolded to the control surface
of the 12-channel input bay. They are displayed from right to left across the control
surface in ascending order (according to channel number). When this bay is full,
population starts at the right of the 4-channel input bay. Any input channel members
remaining will not be visible, but they can be navigated to the control surface using the
navigation controls (see "To select a group" on page 53). If any channel bank LEDs in
the input select sections flash while the VCA/POP group's LCD select button is held
down, it means that they contain hidden members.
When you deselect a VCA/POP group, its settings revert to those that were current
when the group select button was last pressed. Recalling another VCA/POP group
deselects the one currently selected.
For information on group selection and navigation, see Chapter 6 "Working With The
PRO6 Control Centre" on page 39 and Chapter 7 "Navigation" on page 47.
For details of VCA/POP group configuration and operation, see "Using VCA/POP groups"
on page 84.
>> To select another group
With a group already selected, select another group by pressing the LCD select button
of the group you want.
>> To clear group selection
Press the LCD select button of the currently selected group.
Chapter 17: Control Groups
PRO6 Live Audio System
Owner's Manual