Parameters Protected By Safes; Overview - Midas PRO6 Owner's Manual

Appendix M: Parameters Protected By
Safes
This appendix shows the parameters affected by each of the safe types (EQ, DYN,
MIC, AUTO, MUTE and FADER).
Note: The parameter areas for the scopes (store and recall) and the safes are, basically
the same. However, the way they are presented in their respective appendices is
different. This may provide you with a useful alternative when referring to this
material, should you prefer one more than the other (see Appendix K "Parameters
Affected By Scope" on page 379).

Overview

The following table provides a quick reference for finding the channel/group safe areas
in this appendix.
Channel EQ safe
or Group
Input "EQ safe"
channel on
page 430
Aux "EQ safe"
on
page 438
Return N/A
Matrix "EQ safe"
on
page 451
Master "EQ safe"
on
page 459
VCA group N/A
XL8 Live Performance System
Owner's Manual
DYN safe MIC safe
"DYN "MIC safe"
(dynamic) on
safe" on page 433
page 431
"DYN "MIC safe"
(dynamic) on
safe" on page 441
page 440
N/A "MIC safe"
on
page 446
"DYN "MIC safe"
(dynamic) on
safe" on page 454
page 453
"DYN "MIC safe"
(dynamic) on
safe" on page 462
page 461
N/A N/A
AUTO safe MUTE safe
"AUTO "MUTE
(automatio safe" on
n) safe" on page 434
page 434
"AUTO "MUTE
(automatio safe" on
n) safe" on page 442
page 441
"AUTO "MUTE
(automatio safe" on
n) safe" on page 447
page 447
"AUTO "MUTE
(automatio safe" on
n) safe" on page 455
page 454
"AUTO "MUTE
(automatio safe" on
n) safe" on page 463
page 462
"Automatio "Mute
n safe" on (MTE) safe"
page 466 on
page 467
427
FADER
safe
"FADER
safe" on
page 435
"FADER
safe" on
page 443
"FADER
safe" on
page 448
"FADER
safe" on
page 456
"FADER
safe" on
page 464
"Fader
(FDR) safe"
on
page 468