System Settings - Kia K5 2021 Owner's Manual

Table of Contents

Advertisement

Driving your vehicle
Use only genuine Kia parts to
repair the rear bumper where the
rear corner radar is located.
Do not apply license plate frame
or objects, such as a bumper
sticker, film or a bumper guard
near the rear corner radar.
The system may not work prop-
erly if the bumper has been
replaced, or the surroundings of
the rear corner radar has been
damaged or paint has been
applied.
If a trailer, carrier, etc. is installed,
it may adversely affect the per-
formance of the rear corner radar
or the system may not operate.
CAUTION
For more details on the precautions
of the front view camera, refer to
"Forward Collision Avoidance Assist
(FCA) - front view camera only (if
equipped)" on page 5-60.

System Settings

Setting functions for the system
Blind-Spot Safety
With the ENGINE START/STOP
button in the ON position, select or
deselect 'Driver Assistance → Blind-
Spot Safety' from the Settings
Blind-Spot Collision-Avoidance Assist (BCA)
menu to set whether or not to use
each function.
If 'Active Assist' is selected, the
system will warn the driver with a
warning message, an audible
warning, and braking assist will be
applied depending on the collision
risk levels.
If 'Warning Only' is selected, the
system will warn the driver with a
warning message, and an audible
warning depending on the collision
risk levels. Braking will not be
assisted.
If 'Off' is selected, the system will
turn off.
ODL3A050288
When the engine is restarted with
the system off, the 'Blind-Spot
Safety System is Off' message will
appear on the cluster.
If you change the setting from 'Off'
to 'Active Assist' or 'Warning Only',
the warning light on the side view
mirror will blink for approximately 3
seconds.
5
5
97

Advertisement

Table of Contents
loading

Table of Contents