Kia K5 2021 Owner's Manual page 152

Features of your vehicle
1. Programming HomeLink
The following steps show how to
program HomeLink. If you have any
questions or are having difficulty
programming your HomeLink but-
tons, refer to the HomeLink website
or call the HomeLink customer sup-
port toll-free number. Do this,
before going back to the dealer who
sold you the car.
Visit the HomeLink website at:
www.homelink.com. Then at the
top of the page, choose your
vehicle make. Then watch the You
Tube video, and/or access addi-
tional website information.
If you choose to access the web-
site via your cell phone, scan the
QR code.
Or, call HomeLink customer sup-
port at 1-800-355-3515
(Please have the vehicle make/
model AND the opener device
make/model readily available.)
1) Programming Preparation
1. When programming a garage door
opener, it is advised to park the
vehicle outside of the garage.
2. It is recommended that a new
battery be placed in the hand-
held transmitter of the device
being programmed to HomeLink
4 62
for quicker training and accurate
transmission of the radio-fre-
quency signal.
3. Place the ignition switch to the
ACC (Accessory) position for pro-
gramming of HomeLink.
ODL3A040502
2) Programming a New HomeLink
Button
1. Press and release the HomeLink
button (1), (2) or (3), you would
like to program. The HomeLink
indicator light (7) will flash orange
slowly (if not, perform the steps
of "Erasing HomeLink Buttons"
section, and start over).
ODL3A040501
Mirrors