En Route, Standard, or Terminal Shield Type
1. While viewing the TCAD Control menu, touch the Shield Type
Touch To Select
Shield Type:
Approach or
Standard
Touch To Manually
Set Shield Height
Figure 4-20 TCAD 9900B Shield Setup for En Route, Standard, and Terminal
2. Touch the Shield Height key and use the keypad to select
3. Touch the Shield Range key and use the keypad to select
4.4.3.3
Approach Mode
1. While viewing the TCAD Control menu, touch the Approach
2. Touching the Approach key toggles Approach Mode between
GTN 650/750 Series SW V3.00 Upgrade Supplement 190- 01007-05 Rev A
key and touch the desired Shield Type: Enroute, Standard, or
Terminal.
the Shield Height value. The selected value will be shown in
the Shield Range key.
the Shield Range value. The selected value will be shown in
the Shield Range key.
key to activate Approach Mode TCAD traffic.
Set, Armed, or Active.
Touch To Shield Range
25