GTN-GNS Crossfilling:
• GTN to GNS – Active flight plans, active direct-to, User waypoints
• GNS to GTN – User waypoints
1. While viewing the System Setup page, touch the GNS Crossfill
2. Touch Auto GNS Crossfill to enable Crossfill and send the
3. Touch the Transfer User Waypoints key to transfer the User
98
GTN 650/750 Series SW V3.00 Upgrade Supplement 190- 01007-05 Rev A
Settings key to reach the GNS Crossfill settings.
Figure 8-2 GTN-GNS Crossfill Selection
Active Flight Plans and the active Direct-To course to the GNS
unit.
Waypoints from the GTN unit to the connected GNS unit.
Figure 8-3 GTN-GNS Crossfill
Touch OK to Enable Auto
Crossfill With Dual Units
Touch OK to Manually
Transfer User Waypoints
Transfer Of User
Waypoints In Progress