Table of Contents
Advertisement
Magnify the AF Area Position ([AF-Point Scope])
This magnifies the focus point when the AF mode is [
other AF modes, the center of the screen is magnified.)
You can check focus and observe an enlarged subject as with a telephoto
lens.
1
Register [AF-Point Scope] to the Fn button. (l 321)
2
Enlarge the AF area position by pressing and holding the Fn button.
When the screen is enlarged, pressing the
0
shutter button halfway re-acquires focus in
a small central AF area.
When the screen is enlarged, turn
0
to adjust the magnification.
Use
When the screen is enlarged, [AFC] changes to [AFS].
0
When the following functions are being used, AF-Point Scope does not work:
0
– [Post-Focus]
– [6K/4K Pre-Burst]
– [65:24]/[2:1] ([Aspect Ratio])
– [Miniature Effect] ([Filter Settings])
– [Multiple Exposure]
– [Live Cropping]
You can change the display method of the magnified screen:
0
[
]
[
for more detailed adjustments.
]
[AF-Point Scope Setting] (l 376)
or
5. Focus/Zoom
], [
], or [
]. (In
97
Advertisement
Table of Contents
