Table of Contents
Advertisement
On the recording screen, you can rotate the focus ring to display the MF Assist
0
screen. If the focus ring has been rotated to enlarge the display, the assist
screen will be exited a short time after you cease the operation.
You can also display the MF Assist screen by pressing the [
0
During MF, pressing [AF ON] will activate AF.
0
The recording distance reference mark indicates the
0
position of the imaging surface. This becomes the
reference when measuring the recording distance.
You can change the Focus Peaking sensitivity and the display method:
0
[
]
[
]
You can memorize the MF Assist position separately for vertical and horizontal
0
orientations:
[
]
[
]
You can change the display method of the magnified screen:
0
[
]
[
]
You can change the MF Guide display units:
0
[
]
[
]
You can disable focus ring operation:
0
[
]
[
]
You can set the movement of the MF Assist position to loop:
0
[
]
[
]
The camera memorizes the focus point when you turn it off:
0
[
]
[
]
The amount of focus movement can be set:
0
[
]
[
]
[Focus Peaking] (l 356)
[Focus Switching for Vert / Hor] (l 119)
[MF Assist] (l 374)
[MF Guide] (l 374)
[Focus Ring Lock] (l 374)
[Looped Focus Frame] (l 377)
[Lens Focus Resume] (l 394)
[Focus Ring Control] (l 394)
5. Focus/Zoom
].
123
Advertisement
Table of Contents
