Table of Contents
Advertisement
Removing a Card
1
Open the card door.
Check that the card access light A is
0
turned off and then open the card door.
2
Push the card until it clicks and then
pull the card out straight.
The card may be warm just after the camera has been used.
0
Do not perform the following operations during access.
0
The camera may operate incorrectly or the card and recorded images
may be damaged.
– Turn off the camera.
– Remove the battery or card or disconnect the power plug.
– Subject the camera to vibration, impacts, or static electricity.
2. Getting Started
47
Advertisement
Table of Contents
