Table of Contents
Advertisement
6. Drive/Shutter/Image Stabilizer
3
Set the recording settings.
[Mode]
[Shooting
Interval Setting]
[Start Time]
[Image Count]/
[Shooting
Interval]
[Exposure
Leveling]
4
Close the menu.
≥Press the shutter button halfway.
5
Start recording.
≥Press the shutter button fully.
When [Start Time Set] is set, the camera
0
will enter into sleep status until the start
time is reached.
During recording standby, the camera enters into sleep status when no
0
operation is performed for a certain period of time.
The recording will stop automatically.
0
146
Switches between Time Lapse Shot and Stop Motion
Animation.
[ON]
[OFF]
[Now]
[Start Time Set]
Sets the number of pictures and the recording interval to
be taken.
[Shooting Interval] is not available when [Shooting
0
Interval Setting] is set to [OFF].
Adjusts the exposure automatically to prevent large
changes in brightness between adjacent frames.
Sets the interval before the next
recording takes place.
Takes pictures without leaving
recording intervals.
Starts recording when the shutter
button is pressed fully.
Starts recording at the set time.
Advertisement
Table of Contents
