Table of Contents
Advertisement
[Reset]
[Time Code
[Manual Input]
Value]
[Current Time]
[DF]
[Time Code
Mode]
[NDF]
0
Time code information is added to images output via HDMI when
recording with the [
0
[HDMI Time
Code Output]
0
When the following functions are being used, [Time Code Mode]
is fixed to [NDF]:
– [PAL] ([Switch NTSC/PAL])
– 24p [Rec Quality]
The time code can also be output via HDMI by setting the mode
dial to [
] during playback. In the [Setup] ([IN/OUT]) menu,
set [HDMI Mode (Playback)] in [TV Connection] to [AUTO].
(l 401)
The device screen may go dark depending on the connected
device.
Sets to 00:00:00:00 (hour: minute: second:
frame)
Manually input hour, minute, second and
frame.
Sets hour, minute and second to current time
and sets frame to 00.
Drop Frame. The camera modifies the
difference between recorded time and time
code.
Seconds and frames are separated by ".".
0
(Example: 00:00:00.00)
Non-Drop Frame. Records the time code
without drop frame.
Seconds and frames are separated by ":".
0
(Example: 00:00:00:00)
] mode.
10. Recording Videos
255
Advertisement
Table of Contents
