Table of Contents
Advertisement
The recorded image looks rough.
Noise appears on the picture.
Try the following:
0
– Reduce the ISO sensitivity. (l 199)
– Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each
item other than [Noise Reduction] to the negative direction. (l 211)
– Set [Long Exposure NR] to [ON]. (l 351)
The subject appears distorted on the image.
When a moving subject is recorded while using the following functions, the subject
0
may appear distorted in the picture:
– [ELEC.]
– Video recording
– [6K/4K PHOTO]
This is a characteristic of the CMOS sensor that is the image sensor of the camera,
and is not a malfunction.
Striping or flicker may appear under lighting such as fluorescent or
LED lighting.
This is characteristic of CMOS sensors which serve as
0
the camera's pickup sensors.
This is not a malfunction.
When using the electronic shutter (l 175), lowering the
0
shutter speed may reduce the effect of the horizontal
stripes.
If flicker or horizontal stripes are noticeable when
0
recording video, this can be mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)] (l 365), or fix the shutter speed with the
[
]/[S&Q] mode (l 244).
17. Materials
507
Advertisement
Table of Contents
