Table of Contents
Advertisement
[Custom] menu
[Level Gauge]
[Luminance Spot
Meter]
[Framing Outline]
[Show/Hide Monitor
Layout]
[Monitor / Display (Photo)]
[ON]/[OFF]
Displays the level gauge which is useful in correcting
camera tilt.
A Horizontal
B Vertical
C Green (no tilt)
Even after correcting the tilt, there may still be an error of
0
approx. n1o.
When the camera is tilted significantly upwards or
0
downwards, the level gauge may not be displayed
correctly.
You can adjust the level gauge and reset the adjusted
0
values in [Level Gauge Adjust.] in the [Setup] ([Monitor /
Display]) menu. (l 398)
[ON]/ [OFF]
Specify any spot on the subject to measure the luminance
over a small area.
For details, refer to page 266.
0
[ON]/ [OFF]
Displays the outline for the live view.
[Control Panel]
[Black Screen]
Displays the control panel and black screen when switching
between displays using [DISP.] button. (l 67)
[ON]/[OFF]
[ON]/[OFF]
14. Menu Guide
391
Advertisement
Table of Contents
