Table of Contents
Advertisement
[Playback]
[Protect]
[Rating]
[Add/Delete Info.]
[Single]/[Multi]/[Cancel]
You can set protection for images so that they will not be
deleted by mistake.
However, if you format the card, the protected images will
also be deleted.
For information about how to select images, refer to page
0
406.
Be careful because the [Protect] setting may be disabled
0
on a device other than this camera.
[Single]/[Multi]/[Cancel]
If you set any of the five different rating levels for images,
you can do the following:
Deleting all images except for those with ratings.
0
Play back or show a slide show of images by the rating
0
level.
Check the rating level in the file details display in operating
0
systems such as Windows 10, Windows 8.1, and
Windows 8. (JPEG images only)
1
Select an image. (l 406)
2
Press 21 to select a rating level (1 to 5) and then
press
or
When [Multi] is selected, repeat Steps 1 and 2.
0
To cancel the setting, set the rating level to [OFF].
0
.
14. Menu Guide
411
Advertisement
Table of Contents
