Overview; Control Panel - Bosch MUC6 Series Instruction Manual

Overview

X Figure A
1 Multi cooker with steam pressure
function (basic appliance)
2 Lid

3 Control panel

4 Pressure locking handle
5 Steam release button
6 Removable steam outlet
7 Removable condensation tank
8 Opening button for the lid
9 Pan with non-stick coating
10 Pan handles
11 Mains connection
12 Carrying handle
13 Removable lid insert
14 Sealing ring
15 Safety valve
16 Steam valve
17 Overpressure protection
18 Mount for lid insert
19 Fastening screw
20 Steam release chamber
21 Steam valve opening with seal
22 White steam release lever
23 Valve plug
24 Manual unlocking for overpressure
protection
X Figure B
25 Deep frying basket with removable
handle*
26 Steamer insert, 2-part
27 Spatula
28 Ladle
29 Measuring beaker*
30 Mains cable
31 Operating instructions
32 Recipe book
* Depending on the model
The operating instructions refer to different
models of the appliance.X "Model over-
view and technical data" see page 23
MUC6-8_RU_8001018000.indb 5
Control panel
X Figure C
The control panel consists of controls
(buttons) and indicators (LEDs). The
buttons can be used to select the individual
preparation programmes and adopt the
different setting options (e.g. selection
of steam pressure function, preparation
temperature and time). The settings are
indicated via the illuminated LEDs and/or
the display.
Controls
Standby
B
Switches from standby mode to func-
tion selection mode and back again.
A Set the start time delay
The start time delay can be set for
the selected preparation programme.
Select a preparation programme
D
from the list (h)
The individual preparation pro-
grammes are displayed one after
another by repeatedly pressing
button D. The corresponding LED
lights up in the control panel.
E Adjust the preparation time
The pre-configured preparation time
[ средняя ] (medium) for a prepara-
tion programme can be shortened
[ короткая ] or lengthened [ длинная ].
The corresponding indicator (g) lights
up. The corresponding pre-configured
preparation duration is shown in the
display (a).
F Set a customised preparation time
For customised adjustment of the
preparation time.
C Set a customised preparation
temperature
For customised adjustment of the
preparation temperature. For prepa-
ration programmes with enabled
steam pressure function, the temper-
ature is pre-configured (f) and cannot
be adjusted individually.
Overview en
5
16.07.2015 12:14:59