Figure 3-5 Gsu 75 Mounting - Garmin GSU 75 Series Installation Manual

3.7.2 GSU 75 Mounting
NOTE
When mounting the GSU 75 rack to the airframe, and the unit to the rack, it is important
to ensure that lockdown mechanisms are tight for proper unit operation.
After ensuring that requirements are met, assemble the GSU 75 mounting plate kits according to the
dimensions given in Appendix
Mounting the GSU 75
To install the GSU 75 (refer to Figure 3-5):
1. Place the GSU 75 unit on the remote rack.
2. Slide the GSU 75 back until the feet are fully engaged with the remote rack.
3. Push down and simultaneously turn each retention screw clockwise. Torque each retention screw
to 15-20 in-lbs.
To disengage the GSU 75 (refer to Figure 3-5):
1. Turn each retention screw counterclockwise until they disconnect from the remote rack.
2. Slide the GSU 75 unit forward to remove from the remote rack.
190-01639-00
Rev. 6
The document reference is online, please check the correspondence between the online documentation and the printed version.
A. Install the unit assembly.
REMOTE RACK THREADED BOSS
2 PLACES
RETENTION SCREW CAPTIVE TO UNIT
2 PLACES

Figure 3-5 GSU 75 Mounting

GSU 75 FEET ENGAGED
INTO REMOTE RACK
2 PLACES
GSU 75 ADAHRS Installation Manual
340095
Page 3-10