Fluke 291 User Manual page 136

291, 292, 294
Users Manual
ARBINSSTD <cpd1>,<cpd2>,
<nrf1>,<nrf2>
ARBINVERT <cpd>,<nrf1>,
<nrf2>
ARBLEN? <cpd>
ARBLINE <cpd>,<nrf1>,
<nrf2>,<nrf3>, <nrf4>
ARBLIST?
ARBOFFSET <cpd>,<nrf1>,
<nrf2>,<nrf3>
ARBPOINT <cpd>,<nrf1>,
<nrf2>
ARBRENAME <cpd1>,<cpd2>
ARBRESIZE <cpd>,<nrf>
BEEP
BEEPMODE <cpd>
BSTCNT <nrf>
CF?
CFSIZE?
CFLABEL?
CLKFREQ <nrf>
CLKPER <nrf>
COPYCHAN <nrf>
DCOFFS <nrf>
EER?
FILTER <cpd>
17-24
Shop for Fluke products online at:
Insert the standard waveform <cpd2> into
the arbitrary waveform <cpd1> from start
address <nrf1> to stop address <nrf2>.
Invert arbitrary waveform <cpd> between
start address <nrf1> and stop address
<nrf2>.
Returns the length, in points, of the arbitrary
waveform <cpd>.
Draw a line in arbitrary waveform <cpd>
from start address/data <nrf1>/<nrf2> to
stop address/data <nrf3>/<nrf4>.
Returns a list of all arbitrary waveforms on the
memory card, each will return a name and
length in the following form <cpd>,<nr1>.
The list will end with <rmt>.
Move the data in arbitrary waveform <cpd>
from start address <nrf1> to stop address
<nrf2> by the offset <nrf3>.
Set the waveform point at address <nfr1> in
arbitrary waveform <cpd> to <nrf2>.
Change the name of arbitrary waveform
<cpd1> to <cpd2>.
Change the size of arbitrary waveform <cpd>
to <nrf>.
Set beep mode to <ON>, <OFF>, <WARN>,
or <ERROR>.
Sound one beep.
Set the burst count to <nrf>.
Returns available Compact Flash memory
capacity (–1 for no card).
Returns the formatted capacity of the memory
card in MBytes.
Returns the volume label of the memory card.
Set the arbitrary sample clock freq to <nrf>
Hz.
Set the arbitrary sample clock period to
<nrf> sec.
Copy the parameters from the current setup
chan to channel <nrf>.
Set the dc offset to <nrf> volts.
Query and clear execution error number
register.
Set the output filter to <AUTO>, <ELIP>,
<BESS> or <NONE>.
MyFlukeStore
www.
1.888.610.7664
.com