Fluke 291 User Manual page 101

291, 292, 294
Users Manual
Pressing STORE (or store...) calls the screen:
A unique store name must be entered using the left and right cursor keys and the rotary
control. The left and right keys step the edit cursor through the eight possible character
positions of the name and the rotary control is used to scroll through all possible
character choices.
Once the unique name has been entered, the current instrument set-up is saved to that
store name by pressing the execute soft-key.
If the name already exists, the display changes to give the option to overwrite (ok) or
cancel:
Up to 510 named stores can be accommodated on a memory card subject only to
waveform length and card capacity.
Pressing RECALL calls the RECALL screen:
The complete list of the set-ups stored on the memory card can be scrolled through the
display using the rotary control. To make it easier to find a particular set-up in a long list
it is recommended that the set-ups on the card are first sorted into alphabetical order
using the sort facility on the MEMORY CARD screen, described later in this section.
The required set-up is selected with its corresponding soft-key and the recall is actioned
with the execute soft-key. The factory defaults (see appendix D) can be recalled
using the default soft key. Note that loading the defaults does not change any
arbitrary waveforms or set-ups stored on the memory card or the RS232/GPIB/USB
interface settings. The selected set-up can also be deleted from the memory card using
the delete soft-key.
14-4
Shop for Fluke products online at:
Save to store:
"SETUP22 "
execute
File SETUP22
exists,
overwrite?
ok cancel
RECALL: execute
TESTWAVE delete
SETUP6
SETUP22 default
MyFlukeStore
www.
1.888.610.7664
.com