Fluke 291 User Manual page 135

100 ms/s arbitrary waveform generators
Hide thumbs Also See for 291:
Table of Contents

Advertisement

TST?
*
*
WAI
ABORT
AMDEPTH <nrf>
AMPL <nrf>
AMPUNIT <cpd>
ARB <cpd>
ARBAMPL <cpd>,<nrf1>,
<nrf2>,<nrf3>
ARBCOPY <cpd>,<nrf1>,
<nrf2>,<nrf3>
ARBCREATE <cpd>,<nrf>
ARBDATA
<cpd>,<bin data block>
ARBDATA? <cpd>
ARBDATACSV
<cpd>,<csv ascii data>
ARBDATACSV? <cpd>
ARBDEF
<cpd>,<nrf>,
<bin data block>
ARBDEFCSV
<cpd>,<nrf>,
<csv ascii data>
ARBDELETE <cpd>
ARBEDLMTS <nrf1>,<nrf2>
ARBINSARB <cpd1>,<cpd2>,<
nrf1>,<nrf2>
Shop for Fluke products online at:
The generator has no self−test capability and
the response is always 0<rmt>.
Wait for operation complete true. executed
before the next is started
Aborts a phase locking operation.
Set the depth for amplitude modulation to
<nrf> %.
Set the amplitude to <nrf> in the units as
specified by the AMPUNIT command.
Set the amplitude units to <VPP>, <VRMS>
or <DBM>.
Select an arbitrary waveform for output.
Adjust the amplitude of arbitrary waveform
<cpd> from start address <nrf1> to stop
address <nrf2> by the factor <nfr3>.
Block copy in arbitrary waveform <cpd> the
data from start address <nrf1> to stop
address <nrf2> to destination address
<nrf3>.
Create a new, blank arbitrary waveform with
name <cpd> and length <nrf> points.
Load data to an existing arbitrary waveform.
Returns the data from an existing arbitrary
waveform.
Load data to an existing arbitrary waveform.
Returns the data from an existing arbitrary
waveform.
Define a new or existing arbitrary waveform
with name <cpd> and length <nrf> and
load with the data in <bin data block>.
Define a new or existing arbitrary waveform
with name <cpd> and length <nrf> and
load with the data in <csv ascii data>.
Delete the arbitrary waveform <cpd> from
memory card.
Set the limits for the arbitrary waveform editing
functions to start at <nrf1> and stop at
<nrf2>.
Insert the arbitrary waveform <cpd2> into
arbitrary waveform <cpd1>.
Use that part of <cpd2> specified by the
ARBLIMITS command and insert from start
address <nrf1> to stop address <nrf2>.
MyFlukeStore
www.
Remote Operation
Remote Command Summary
1.888.610.7664
.com
17
17-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

292294

Table of Contents