IBM Aptiva Hardware Handbook page 67

Table 9: Error codes, descriptions, and corrective actions (Continued)
Error Code Description
1802 PCI Error (I/O address not
available)
1803 PCI Error (memory above
1MB not available)
1804 PCI Error (memory below
1MB not available)
1805 PCI Error (ROM error)
Notes:
1. An X shown as part of the error code in this table represents any number between 0 and 9.
2. If any of these errors continue after taking the actions listed, check your Services and Support Guide for information on
obtaining service.
Here's what to do:
A PCI adapter card has requested an I/O address that is not available, or the PCI
adapter card may be defective.
Choose ISA Legacy Resources from the Configuration/Setup Utility main menu,
and make sure the I/O port resources settings for ISA legacy adapter cards are
correct. If the I/O port resources settings are not correct, change the settings.
For instructions on using the Configuration/Setup Utility, see page 61. If the
I/O port resources settings are correct, the PCI adapter card may be defective.
A PCI adapter card has requested a memory address that is not available, or the
PCI adapter card may be defective.
Choose ISA Legacy Resources from the Configuration/Setup Utility main menu,
and make sure the memory resources settings for ISA legacy adapter cards are
correct. If the memory resources settings are not correct, change them. For
instructions on using the Configuration/Setup Utility, see page 61. If the
memory resources settings are correct, the PCI adapter card may be defective.
A PCI adapter card has requested a memory address that is not available.
1. Choose ISA Legacy Resources from the Configuration/Setup Utility main
menu, and make sure the memory resources settings for ISA legacy adapter
cards are correct. If the settings are not correct, change the settings. For
instructions on using the Configuration/Setup Utility, see page 61.
2. If all memory resources are being used by ISA legacy adapter cards, you may
need to remove an ISA card to make memory available to the PCI adapter
card. For instructions on removing an adapter card, see page 84.
1. Remove the PCI adapter card. For instructions on removing an adapter card,
see page 84.
2. Restart the computer without the card installed. If the computer restarts
without an error, reinstall the card and restart the computer again. For
instructions on installing an adapter card, see page 84. If the error reoccurs,
the adapter card may be defective.
Error codes, descriptions, and corrective actions 57