Weider Pro 4950 831.14623.0 User Manual page 25

58. Attach the Right Seat (32) to the Right Seat
Frame (8) with two M6 x 16mm Screws (88), an
M6 x 32mm Screw (89), and an M6 Washer
(114).
Insert the Right Seat Frame (8) into the Right
Frame (9). Tighten the Seat Adjustment Knob
(52) into the Right Frame and the Right Seat
Frame. Make sure the Adjustment Knob
passes through one of the holes in the Right
Seat Frame.
59. Attach the Left Seat (129) to the Left Seat
Frame (125) with two M6 x 16mm Screws (88),
an M6 x 45mm Screw (145), and an M6
Washer (114).
Insert the Left Seat Frame (125) into the Left
Frame (122). Tighten a Backrest Adjustment
Knob (53) into the Left Frame and the Left Seat
Frame. Make sure the Adjustment Knob
passes through one of the holes in the Left
Seat Frame.
60. Attach the Right Butterfly Pad (35) to the Right
Butterfly Arm (26) with two M6 x 60mm Button
Screws (91) and two M6 Washers (114).
Repeat this step for the Left Butterfly Pad
(34).
61. Insert a Pad Tube (13) through the indicated
hole in the Leg Lever (12). Slide a Foam Pad
(36) onto each end of the Pad Tube. Note: Lift
the Leg Lever Cable (51) when inserting a
Pad Tube through the hole in the bottom of
the Leg Lever.
Press a Pad Cap (37) into an end of each
Foam Pad (36) and slide a Foam Cover (143)
onto each Foam Pad.
Repeat this step for the other Pad Tube (13)
and the Front Leg (10).
58
32
8
88
59
114
145
53
60
91
114
26
61
143
37
36
51
25
89
114
9
52
129
125
88
122
34
35
13
10
12
13
143
37
36