Weider Pro 4950 831.14623.0 User Manual page 22

Weider user manual weight system 831.14623.0
Table of Contents

Advertisement

46. Insert a 90mm Pulley (48) into the Front Leg
(10) from the indicated direction. Attach the
Pulley to the Front Leg with an M10 x 68mm
Bolt (85), two M10 Washers (80), two 13mm
Steel Spacers (109) and an M10 Nylon Locknut
(77).
47. Route the Leg Lever Cable (51) under the indi-
cated bars on the Right Base (1). Then, wrap
the Cable under a 90mm Pulley (48). Attach the
Pulley to the Right Base with an M10 x 50mm
Bolt (97), two Half Guards (55), and an M10
Nylon Locknut (77). Make sure the Half
Guards are oriented as shown.
48. Wrap the Leg Lever Cable (51) over a 90mm
Pulley (48). Attach the Pulley, a Cable Trap
(56), and two Half Guards (55) to the second
hole from the bottom of the Pulley Plates (60)
with an M10 x 50mm Bolt (97) and an M10
Nylon Locknut (77). Make sure the Cable Trap
and the Half Guards are oriented as shown.
49. Wrap the Leg Lever Cable (51) under a 90mm
Pulley (48). Attach the Pulley to the Right Base
(1) with an M10 x 50mm Bolt (97), two Half
Guards (55), and an M10 Nylon Locknut (77).
Make sure the Half Guards are oriented as
shown.
46
85
80
109
10
47
55
97
Bar
1
48
77
55
60
56
48
51
49
48
97
55
1
22
48
51
109
80 77
51
48
55
77
55 97
51
55
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro 4950831.14623.0

Table of Contents