Weider Pro 4950 831.14623.0 User Manual page 15

Weider user manual weight system 831.14623.0
Table of Contents

Advertisement

21. Apply grease to tw0 M10 x 82mm Bolts (84)
and to the indicated locations on the Leg Press
Frame (123) and the Front Leg Press (132).
Attach the Leg Press (124) to the Leg Press
Frame and the Front Leg Press Frame (123,
132) with the two Bolts (84) and two M10 Nylon
Locknuts (77).
22. Apply grease in the locations shown. Insert a
57mm Spacer (69) into the indicated hole in the
Leg Lever (12). Attach the Leg Lever to the
Front Leg (10) with an M10 x 60mm Bolt Set
(116). Make sure the barrel of the Bolt Set is
inserted through both sides of the bracket
on the Front Leg. Make sure the indicated
rod is oriented as shown.
See the left inset drawing. Attach the Lock
Plate (14) to the Front Leg (10) with the M8 x
69mm Shoulder Bolt (87), an M8 Washer (103),
and an M8 Nylon Locknut (78).
See the right inset drawing. Insert the Lock
Plate Pin (95) through the Lock Plate (14) and
the Leg Lever (12). Attach the tether on the
Lock Plate Pin to the Front Leg (10) with an M4
x 12mm Self-tapping Screw (102).
23. Orient a Press Arm Handle (17) with the 90°
bend at the top as shown in the inset drawing.
Attach the Press Arm Handle to the Right Press
Arm (16) with two M10 x 65mm Button Bolts
(106), four M10 Washers (80), four 11mm
Spacers (99), and two M10 Nylon Locknuts
(77).
Repeat this step for the Left Press Arm (not
shown).
21
Grease
Grease
84
123
124
77
132
22
Grease Bracket
116
69
Grease
116
10
12
Rod
103
14
10
78
14
102
12
95
10
87
80
23
77
99
99
80
99
106
80
99
106
17
90° Bend
16
17
Page 15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro 4950831.14623.0

Table of Contents