Weider Pro 4950 831.14623.0 User Manual page 20

Weider user manual weight system 831.14623.0
Table of Contents

Advertisement

38. Wrap the Lat Cable (49) over a 90mm Pulley
(48). Attach the Pulley to the Top Center Frame
(148) wtih an M10 x 45mm Bolt (86) and an
M10 Nylon Locknut (77).
39. Set an M12 Large Washer (98) on top of the
Weight Tube (20). Thread the M12 Nut (112) all
the way onto the Lat Cable (49).
Thread the Lat Cable (49) into the Weight Tube
(20) two turns. Tighten the M12 Nut (112)
against the M12 Large Washer (98).
40. Identify the Press Cable (133). Attach the
Cable to the Left Frame (122) with an M10 x
82mm Bolt (84), an M10 Washer (80), and an
M10 Nylon Locknut (77). Make sure the flat
edge of the Cable is against the Left Frame.
41. Wrap the Press Cable (133) over a 90mm
Pulley (48). Attach the Pulley and a Cable Trap
(56) to the Leg Press Frame (123) with an M10
x 110mm Bolt (93), two Guards (54), two M10
Washers (80), and an M10 Nylon Locknut (77).
Make sure the Cable Trap is oriented as
shown.
38
77
86
148
48
49
39
49
112
20
98
40
122
84
77
80
133
Flat Edge
41
54
133
93
56
48
80
80
54
77
123
Page 20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro 4950831.14623.0

Table of Contents