Weider Pro 4950 831.14623.0 User Manual page 18

30. Identify the Lat Cable (49). Route the Cable
up through the Left Top Frame (126) and over a
90mm Pulley (48). Attach the Pulley inside the
Left Top Frame with an M10 x 82mm Bolt (84),
two M10 Washers (80), two 19mm Spacers
(67), and an M10 Nylon Locknut (77).
31. Route the Lat Cable (49) over a 90mm Pulley
(48) and down through the Left Top Frame
(126). Attach the Pulley inside the Left Top
Frame with an M10 x 82mm Bolt (84), two M10
Washers (80), two 19mm Spacers (67), and an
M10 Nylon Locknut (77).
32. Wrap the Lat Cable (49) under a 90mm Pulley
(48). Attach the Pulley, a Cable Trap (56), and
two Half Guards (55) to the Military Press
Frame (127) with an M10 x 50mm Bolt (97), an
M10 Washer (80), and an M10 Nylon Locknut
(77). Make sure the Cable Trap and the Half
Guards are oriented as shown.
33. Route the Lat Cable (49) up through the Left
Top Frame (126) and over a 90mm Pulley (48).
Attach the Pulley inside the Left Top Frame with
an M10 x 82mm Bolt (84), two M10 Washers
(80), two 19mm Spacers (67), and an M10
Nylon Locknut (77).
30
77
31
126
80
77
32
55
49
48
97
56
127
80
55
33
49
80
67
77
18
49
48
84
126
80
67
67
80
84
48
67
80
49
67
77
84
48
80
67
126