Table of Contents
Advertisement
Key Minder continuously verifies HDCP compliance — Key Minder authenticates
•
and maintains continuous HDCP encryption between input and output devices to
ensure quick and reliable switching in professional AV environments, while enabling
simultaneous distribution of a single source to multiple displays.
•
HDCP authentication and signal presence confirmation — Provides real-time
verification of HDCP status for each digital video input and output. This allows for easy
signal and HDCP verification through front panel LEDs, RS-232, USB, or Ethernet,
providing valuable feedback to a system operator or helpdesk support staff.
HDCP Visual Confirmation — When HDCP-encrypted content is transmitted to
•
a non-HDCP compliant display, a full screen green signal is sent to the display for
immediate visual confirmation that protected content cannot be viewed on that display.
•
HDMI to DVI Interface Format Correction — Automatically enables or disables
embedded audio and InfoFrames, and sets the correct color space for proper
connection to HDMI and DVI displays.
•
Automatic color bit depth management — The DTP2 T 204 automatically adjusts
color bit depth based on the display EDID, preventing color compatibility conflicts
between source and displays.
•
Output muting control — Enables HDMI output muting at any time.
Front panel security lockout — Locks all front panel functions. All functions, however,
•
are available through USB, RS-232, and Ethernet control.
•
Built-in web pages — Enables the use of a standard browser for device monitoring
and troubleshooting over an intuitive web interface.
•
RS-232 control port — Enables the use of serial commands for integration into a
control system. Extron products use the SIS command protocol, a set of basic ASCII
commands that allow for quick and easy programming.
•
Contact closure remote control with tally output — Allows for remote selection of
an input channel, while a tally output provides +5 VDC to light an LED to indicate the
currently selected input. The contact and tally ports can be configured for independent
use when the DTP2 T 204 is connected to an external control processor.
Compatible with TeamWork SM Series Cables — SM cables provide convenient
•
connectivity and user input selection and control for TeamWork Collaboration Systems.
See the TeamWork System Builder to create a customized system for your collaboration
environment.
•
Front panel USB configuration port — Enables easy configuration without the need
to access the rear panel.
•
LED indicators for signal presence, HDCP, power, and link status — Provides
visual indication of system status for real-time feedback and monitoring of key
performance parameters.
•
RJ-45 signal and link LED indicators for DTP port — Provides a means for
validating signal flow and operation, allowing quick identification of connectivity issues.
•
Easy setup and commissioning with PCS — Enables configuration of multiple
products using a single software application.
1U high, half rack width metal enclosure
•
•
Includes LockIt HDMI cable lacing brackets
•
External Extron Everlast power supply included — (Replacement part number
70-769-01) Provides worldwide power compatibility with high-demonstrated reliability
and low power consumption. The Extron Everlast Power Supply is covered by a 7-year
parts and labor warranty.
DTP2 T 204 Switcher • Introduction
3
Advertisement
Table of Contents
