Table of Contents
Advertisement
Introduction
This section gives an overview of the Extron DTP2 T 204 switcher. Topics include:
•
•
•
•
About this Guide
This guide describes the DTP2 T 204 switchers and discusses how to install, configure, and
operate them.
In this guide, the terms "DTP2 T 204" and "switcher" are used interchangeably to refer to
the DTP2 T 204 switcher.
About the DTP2 T 204 Switcher
The Extron DTP2 T 204 is a four-input switcher for sending HDMI and control up to 330 feet
(100 meters) over a shielded CATx cable to an Extron DTP-enabled product. It has four
HDMI inputs and a DTP2 output. The DTP2 T 204 supports video signals at resolutions up
to 4K @ 60 Hz at 4:4:4 chroma sampling and complies with HDCP 2.3. Ethernet remote
control and contact/tally connections facilitate integration in professional environments.
Integrator-friendly features include EDID Minder, auto-switching between inputs, and
bidirectional RS-232 and IR pass-through for remote AV device control. The half-rack
enclosure enables discreet placement within lecterns, beneath tables, or wherever needed
to meet application requirements.
The DTP2 T 204 provides reliable switching and transmission of HDMI video at data rates
up to 18 Gbps, along with support for HDR, Deep Color up to 12-bit, 3D, and embedded
HD lossless audio formats. For simplified operation, it can be configured to automatically
switch between the sources. The DTP2 output can be configured to send video and
embedded audio, plus bidirectional RS-232 and IR signals, to an HDBaseT-enabled display.
Features
•
•
•
•
•
About this Guide
About the DTP2 T 204 Switcher
Features
Application Diagrams
Transmits HDMI and control up to 330 feet (100 meters) over a shielded CATx
cable
Inputs — Four HDMI female type-A connectors
Output — One DTP2 twisted pair output on RJ-45
Supports computer and video resolutions up to 4K @ 60 Hz at 4:4:4 chroma
sampling — Support of 4K @ 60 Hz at 4:4:4 chroma sampling requires connection to
a matching DTP2 product.
Auto-switching between inputs — Multiple switching priority modes are available,
including last-connected input and user-selectable priority.
DTP2 T 204 Switcher • Introduction
1
Advertisement
Table of Contents
