03 Your driving environment
Lighting
Home safe lighting
Some of the exterior lighting can be kept
switched on to work as home safe lighting
after the car has been locked.
1. Remove the remote control key from the
ignition switch.
03
2. Move the left-hand stalk switch towards
the steering wheel to the end position
and release it. The function can be
activated in the same way as with main
beam flash, see page 72.
3. Get out of the car and lock the door.
When the function is activated, dipped beam,
the parking lamps, direction indicator lamps,
door mirror lamps, number plate lighting,
inner roof lamps and courtesy lighting are
switched on.
The time for which the home safe lighting can
be kept switched on can be set under
settings
Light settings
lighting
. For a description of the menu sys-
tem, see page 104.
76
Approach lighting
Approach lighting is switched on with the
remote control key, see page 39, and is used
to switch on the car's lighting at a distance.
When the function is activated with the
remote control the parking lamps, direction
indicator lamps, door mirror lamps, number
plate lighting, inner roof lamps and courtesy
lighting are switched on.
The time for which the approach lighting can
be kept switched on can be set under
settings
lighting
. For a description of the menu sys-
tem, see page 104.
Car
Home safe
Car
Light settings
Approach
Adjusting headlamp pattern
Headlamp pattern, left-hand traffic
Headlamp pattern, right-hand traffic
The headlamp pattern must be adjusted to
avoid dazzling oncoming motorists and be
set for either right or left-hand traffic. The