Preparations
The seats can be adjusted for a certain time
after unlocking the door with the remote con-
trol key without the key in the ignition switch.
Seat adjustment is normally made when the
ignition is on and can always be made when
the engine is running.
Seat with memory function*
1
2
3
Store setting
1. Adjust the seat and the door mirrors.
2. Press and hold the
button, while
depressing the
,
or
Using a stored setting
Press one of the memory buttons
until the seat and the door mirrors stop. If you
release the button then the movement of the
seat will stop.
Key memory* in remote control key
The positions of the driver's seat and the
door mirrors are stored in the key memory
when the car is locked with the remote con-
trol key.
4
When the car is unlocked with the same
remote control and the driver's door is
opened the driver's seat and also the door
mirrors automatically adopt the positions
stored in the key memory.
button.
NOTE
The seat and the door mirrors do not move
–
if they are already in the relevant position.
03 Your driving environment
It is also possible to use the key memory by
pressing the unlock button on the remote
control key when the driver's door is open.
The key memory can be activated/deacti-
vated under
Car key memory
. For a description of the menu
ror positions
system, see page 104.
NOTE
The key memory in the two remote controls
and the seat memory are completely inde-
pendent of each other.
Seats
Seat & mir-
03
67