Main/Dipped Beam; Main Beam Flash; Dipped Beam; Active Bi-Xenon Lights - Volvo XC70 Owner's Manual

03 Your driving environment
Lighting

Main/dipped beam

03
Headlamp control and stalk switch
Position Specification
Automatic*/deactivated
0
dipped beam. Only main
beam flash.
Position/parking lamps
Automatic dipped beam.
Main beam and main beam
flash work in this position.
NOTE
Main beam can only be activated in
position .
72

Main beam flash

Move the stalk switch gently to
position toward the steering wheel. Main
beam comes on until the stalk switch is
released.

Dipped beam

When the engine is started, dipped beam is
activated automatically* if the headlamp con-
trol is in position . If necessary, auto-
0
matic dipped beam for this position can be
deactivated by an authorised Volvo work-
shop.
In position dipped beam is always acti-
vated automatically when the engine is run-
ning or with ignition position II.
Main beam
Main beam can only be activated when the
headlamp control is in position
vate/deactivate main beam by moving the
stalk switch to the end position
the steering wheel and release.
When main beam has been activated the
symbol illuminates in the combined
instrument panel.

Active Bi-Xenon Lights*

Headlamp pattern with function deactivated (left)
and activated (right) respectively
If the car is equipped with active headlamps
(Active Bi-Xenon Lights, ABL) the light from
the headlamps follows the steering wheel
movement in order to provide maximum
lighting in bends and junctions and so pro-
. Acti-
vide increased safety.
The function is activated automatically when
towards
the car is started. The button
centre console illuminates when the function
is activated, it flashes in the event of a mal-
function. The function is only active in twilight
or darkness and only when the car is moving.
The function can be deactivated/activated
with the button.
in the