Wiper blades
Service position
The wiper blades must be in service position
to facilitate replacement or washing.
1. Turn the ignition to position 0 , see page 65
and keep the remote control key in the
ignition switch.
2. Move the right-hand stalk switch up for
about 1 second. The wipers then move
to standing straight up.
The wipers return to the starting position
when the car is started.
06 Maintenance and specifications
Replacing the wiper blades, windscreen
1
2
3
Wiper blades and washer fluid
Turn up the wiper arm. Press the button
located on the wiper blade mounting and
pull straight out parallel with the wiper
arm.
Slide in the new wiper blade until a
"click" is heard.
Check that the blade is firmly installed.
NOTE
The wiper blades are different lengths. The
blade on the driver's side is longer than the
blade on the passenger side.
06
195