06 Maintenance and specifications
Lamps
Cargo area lighting
1. Insert a screwdriver and gently prise so
that the lamp housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and
press back the lamp housing.
06
194
Vanity mirror lighting
Removing the mirror glass
1. Insert a screwdriver underneath the lower
edge, in the centre. Carefully prise up the
lug on the edge.
2. Insert the screwdriver underneath the
edge on the left and right-hand sides
(by the black rubber sections), and
prise carefully so that the glass comes
loose in the lower edge.
3. Carefully detach and lift aside the entire
mirror glass and cover.
4. Replace the bulb.
Fitting the mirror glass
1. Press the three lugs at top edge of the
mirror glass back into position.
2. Then press the three lower lugs back
into position.
Specification, bulbs
Lighting
Output W Type
Extra main beam,
55
Bi Xenon, ABL
Dipped beam, hal-
55
ogen
Main beam, Halo-
65
gen
Front direction
21
indicators
Direction indica-
21
tors, rear
Front fog lamps
35
Courtesy, cargo
5
area, number
plate lighting
Vanity mirror
1.2
Front position and
5
parking lamps
Front side marker
5
lamps
Glovebox lighting
5
H7
H7
H9
H21W
PY21W
H8
Tubular
lamp
SV8.5
Tubular
lamp
SV5.5
W5W
W5W
Tubular
lamp
SV8.5