Cruise Control; Activating And Setting The Speed; Adjusting The Set Speed; Temporary Deactivation - Volvo XC70 Owner's Manual

Operation
1
2
4 3
0
Display and controls
Standby mode
Resume set speed
Deactivating
Activate/set speed
Set speed (in brackets = standby mode)

Activating and setting the speed

In order to enable the activation of cruise
control, it must first be engaged in standby
mode with the CRUISE button
bol illuminates in the display and the text
(---) km/h shows that cruise control is in
standby mode.
Cruise control is then activated with
, after which the current speed is stored
and is used as the set speed. The display
text
(---) km/h changes to show the set speed,
e.g. 100 km/h
5
NOTE
Cruise control cannot be engaged at
speeds below 30 km/h.
___

Adjusting the set speed

1
In active mode the speed is adjusted with
long or short presses on
A temporary increase in speed using the
accelerator, such as while overtaking, does
not affect the cruise control setting. When the
accelerator is released the car will return to
the set speed.
NOTE
If one of the cruise control buttons is kept
depressed for more than approx. one
minute then cruise control is disengaged.
The engine must then be switched off in
order to then reset cruise control.
. The sym-
Deactivation
Cruise control is disengaged with CRUISE or
by switching off the engine. The set speed is
or
cleared.
04 Comfort and driving pleasure
.,
or .

Cruise control*

Temporary deactivation

Press 0 to disengage cruise control tempo-
rarily. The saved speed is shown in brackets
in the display, e.g. .
(100) km/h
Automatic temporary deactivation
Cruise control is deactivated spontaneously
when the driving wheels spin or if the car's
speed falls below approx. 30 km/h. Cruise
control is also deactivated when the brakes
are used, when the gear selector is moved to
neutral position or if the accelerator pedal is
depressed for a longer time (approx.
60 seconds). Cruise control then changes
over to standby mode and the set speed is
saved.
Resume set speed
If cruise control has been deactivated tem-
porarily, it can be reactivated by pressing
The speed is then set to the previously set
speed.
NOTE
A significant increase in speed may arise
after the speed has been resumed with
04
.
.
135