06 Maintenance and specifications
Lamps
Removing the cover
NOTE
Before starting to replace a bulb, read
through page 189.
1. Open the lock clamp by pressing up/out.
2. Press down the clips on the cover and
06
remove it.
Reinstall the cover in reverse order.
190
Dipped beam, halogen
1. Detach the headlamp.
2. Remove the cover.
3. Detach the bulb by pressing the holder
downwards.
4. Unplug the connector from the bulb.
5. Fit the new bulb in the socket and snap
it in. It can only be secured in one
position.
Reinstall the parts in reverse order.
Main beam, Halogen
1. Detach the headlamp.
2. Remove the cover.
3. Detach the bulb by turning anticlock-
wise.
4. Unplug the connector from the bulb.
5. Replace the bulb and align it in the
socket & turn clockwise in order to
secure it. It can only be secured in one
position.
Reinstall the parts in reverse order.