Specifications; Attachments/Accessories - Toro 4045 Operator's Manual

Battery-disconnect Switch
Open the rear compartment to access the battery-disconnect
switch.
Turn the battery-disconnect switch to the On or Off position
to perform the following:
•
To energize the machine electrically, rotate the
battery-disconnect switch clockwise to the On position
(Figure 50).
•
To de-energize the machine electrically, rotate the
battery-disconnect switch counterclockwise to the Off
position (Figure 50).
Figure 50
1. Battery-disconnect switch
(On position)
2. Battery-disconnect switch
(Off position)

Specifications

Note: Specifications and design are subject to change
without notice.
Machine
Width
Length
Height
Weight
Handheld unit for the Exit-side-lockout
System
Batteries
Low battery warning
Inactivity timeout
Operating temperature
Storage temperature
Humidity
Radio frequency
Radio RF power
Radio license
Modulation
Antenna
Base unit for the Exit-side-lockout System
Operating temperature
Storage temperature
Humidity
Radio frequency
Radio RF power
Radio license
Modulation
Antenna

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
46
2.2 m (7.2 ft)
6 m (19.7 ft)
2.5 m (8.2 ft)
9,806 kg (21,620 lbs)
3 AAA
3.2V LED—3 flashes for 30
seconds prior to shutdown
Infinite
-20° to 55° C (-4° to 131° F)
-40° to 55° C (-40° to 131° F)
0 to 100%
2405 to 2480 MHz
50 mW (60 GHz)
License-free certification
pending
DSSS
Internal
-20° to 55° C (-4° to 131° F)
-40° to 85° C (-40° to 185° F)
0 to 100%
2405 to 2480 MHz
100 mW (120 GHz)
License-free certification
pending
DSSS
External