Drive Pendant - Toro 4045 Operator's Manual

Drive Pendant

Refer to Figure 44 for the location of the drive pendant.
2
1
Figure 47
1. Engine-speed switch
2. Drive-direction joystick
3. Engine-stop button
Engine-stop Button
Press this button to immediately stop the engine and all
movement/drilling operations. You must pull this button out
before you can start the engine again.
Engine-speed Switch
•
Press and hold the top of this switch to increase the
engine speed.
•
Press and hold the bottom of this switch to decrease the
engine speed.
•
Release the switch to maintain the current engine speed.
Drive-direction Joystick
Use the joystick to control the direction of the machine. The
machine will travel in the direction that you move the joystick.
Drive-speed Switch
The switch sets the speed at which the machine will travel.
Move the switch up for high speed or down for low speed.
3
4
5
g021855
4. Drive-speed switch
5. Operator-presence switch
Operator-presence Switch
Press and hold this button to enable the other controls on the
drive pendant. The machine will stop moving if you release
this button.
43