Main Menu - Trane Z WAVE TZEMT400AB32MAA User Manual

Main Menu

The Thermostat has a menu tree that can be accessed by pressing the "Menu" button on the Main Thermostat screen.
Various configurations of the Thermostat can have different screen contents. The first screen that will come up is the
Menu Selection screen. This is a list of the other menus or functions that can be accessed.
Schedules Screen. (Optional Screen) Only shows up in the Menu Selection list if scheduling is enabled. (See Installer
Settings, then System Settings Menu and then Schedule Enable on page 23). This screen is used to view and set the
programmable setback schedules of the thermostat.
User Settings Screen. This screen is used to set the Clock, Filter Service and Maintenance Service, Screen Timeout,
Fahrenheit/Celsius settings, Sensor Calibration and Backlite/Display settings.
Usage Graph. Shows daily heating and cooling run time hours for a week.
ESM Setpoints. Used to set the Energy Savings Modes heating and cooling setpoints.
ZWave Install. Used to install the thermostat into a ZWave network.
Thermostat Info Screen: This screen shows the firmware versions of the Thermostat and Zwave interface, HVAC system
type and equipment options.
Main Menu
Screen navigation buttons:
Done
Return to Thermostat Screen
Not used
Not used
Select
Select menu item at pointer
Menu Selection
User Settings
Usage Graph
ESM Setpoints
ZWave Install
Don
e
Select
Move menu selection pointer up
Move menu selection pointer
down
13