User Settings Screen; Usage Graph; Esm Setpoints; Zwave Install - Trane Z WAVE TZEMT400AB32MAA User Manual

Thermostat User Guide

User Settings Screen

This screen is a submenu of user settings for the initial setup of the thermostat. You can set the clock, minimized screen
timeout, Fahrenheit or Centigrade selection, sensor calibration and display settings.

Usage Graph

Shows daily heating and cooling runtime hours for a week.

ESM Setpoints

This screen is a submenu of the Energy Savings Mode settings. You can set the heating and cooling setpoint setback
temperatures. These settings are used when the thermostat is in the ESM mode.

ZWave Install

This screen is a submenu for installing the thermostat into a Z-Wave network. When the Z-Wave network controller is
ready to install the thermostat, press the YES button to install.

Thermostat Info Screen

This is a quick reference list of the thermostat firmware versions, Z-Wave network addresses and HVAC system setup.
6