Advertisement
2. Menu Navigation
Navigation through menus is done by the "push & rotate" button (button 5 on Figure 3).
The way to use that button is: rotate to modify a setpoint or a value, then wait 3s for that setpoint or value to
be automatically registered. The symbol "Set" disappears.
0 - Menu = Enter
menu
Home
Screen
2 - Read = Setpoint
display
2 - Pass = Password
3 - Set = Setpoint1
Figure 5
3. Protect setpoints and mode modification by password
The THS04 factory default level is set in PGD1 setting : THS04 – Acces Level = Disable
It means a that there is no need of password to change unit and fan mode or edit setpoint and occupancy
state.
However, it is possible to enable the password by changing setting in PGD1 : Setting-THS04 : Access
Level Enable.
When activated, the password has to be entered on the THS04 under Menu 2 (See Figure 5).
+ Wait
Tc : Cooling
3s
setpoint change
Password Disable by default
+ Wait
1 : First password
3s
digit
Edit
+ Wait
Tc : Cooling
3s
setpoint change
Edit
Th : Heating
setpoint change
2 : second
password digit
+ Wait
Edit
3s
Th : Heating
setpoint change
+ Wait
Edit
3s
+ Wait
3s
+ Wait
3s
Advertisement
