E361 High Engine Coolant Temperature - Perkins 1106D Troubleshooting Manual

96
Troubleshooting Section
System Response:
The event code will be logged.
The warning lamp will be illuminated and the
diagnostic lamp will flash the event code.
Possible Performance Effect:
E360-1
None
E360-3
The derate lamp will be illuminated. The ECM will
derate the power at 17 percent per second for two
seconds.
The shutdown lamp will be illuminated. If the "Enable
Shutdown" parameter is enabled, the engine will shut
down.
Troubleshooting:
Refer to Troubleshooting, "Low Engine Oil Pressure".
Results:
•
OK – STOP.
E361 High Engine Coolant
Temperature
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects a fault
with the engine's coolant temperature. The ECM
detects the following faults:
• The engine has been running for more than three
minutes.
•
The engine coolant temperature trip level for the
event code is reached.
•
Diagnostic code 110-3 Engine Coolant Temperature
open/short to +batt is not active.
•
Diagnostic code 110-4 Engine Coolant Temperature
short to ground is not active.
This document is printed from SPI². Not for RESALE
i03820012
KENR6201-01