Perkins 1106D Troubleshooting Manual page 33

KENR6201-01
Table 27
Value
Disabled
Enabled
User Defined Switch Installation Status
A user defined shutdown switch is an optional
switch input. Programming the "User Defined Switch
Installation Status" parameter to "Enabled" notifies
the ECM that a user defined switch input is present
on pin J1:48. If this parameter is programmed to
"Enabled" and the user defined shutdown switch
closes, the engine will shut down.
Table 28
Value
Disabled
Enabled
This document is printed from SPI². Not for RESALE
Default
Disabled
Default
Disabled
33
Troubleshooting Section