E361 High Engine Coolant Temperature - Perkins M190C Troubleshooting Manual

108
Troubleshooting Section
Possible Performance Effect:
360-1
Engine operation is not affected.
360-2
The ECM will derate power by 17.0 percent per
second up to a maximum of 100 percent while the
derate is active.
Troubleshooting:
Refer to Troubleshooting, "Low Engine Oil Pressure".
Results:
•
OK – STOP.
E361 High Engine Coolant
Temperature
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects a
high engine coolant temperature under the following
conditions:
•
The engine has been running for more than 185
seconds.
• The trip point for the event code for the temperature
of the engine coolant is reached.
•
Diagnostic code 0110-03 Engine Coolant
Temperature voltage above normal is not active.
• Diagnostic code 0110-04 Engine Coolant
Temperature voltage below normal is not active.
•
Diagnostic code 0168-01 Electrical System voltage
low is not active.
Table 26
Trip Point
Delay to Activation
Reset Time
System Response:
If equipped, the diagnostic lamp will come on and the
event code will be logged.
i04012513
Trip Points for the Engine Coolant Temperature
E361-1
103° C (217° F)
30 seconds
5 seconds
Possible Performance Effect:
E361-1
KENR9126
E361-2
111° C (232° F)
30 seconds
5 seconds