Advertisement
Main
Sub
code
code
CE
05
Content
FTP directory error
Detail
The designation of the directory in the FTP
server is improper.
Check
Since the directory of the FTP server
and
registered as the destination of file server send
remedy
scan is improper, the scan data cannot be sent.
Check to confirm that the registration of the
destination is correct.
06
Content
Email address error
Detail
Improper email address
Check
Since the email address registered as the
and
destination of the email send scan is improper,
remedy
scan data cannot be sent. Check to confirm
that the registered destination information is
correct.
09
Content
Email over size limit
Detail
The size of an email to be sent exceeds the
limit.
Check
The size of the scan data exceeds the upper
and
limit of the file size set on the Web screen.
remedy
Reduce the number of sheets of documents or
change the upper limit value in "Send data
upper limit" of the Web screen.
11
Content
Scanner memory shortage
Detail
Memory shortage in scanner process of MX-
NB12.
Check
The memory becomes full during scanning
and
documents Reduce the number of sheets of
remedy
documents, or change the resolution and the
color mode in order to reduce the file size of
the scan data, then retry sending again.
12
Content
LDAP number over
Detail
The number of LDAP exceeds the
specification.
Check
The number of destinations which are the
and
targets of the global address search exceeds
remedy
the max. number. Use a longer set of
characters for search to narrow the area of
search.
18
Content
RTC battery error
Detail
The battery for RTC is low.
Check
Replace the battery for RTC.
and
remedy
E7
01
Content
Duplex model memory error/ Image data error
Detail
1. The memory capacity for the duplex model
machine is wrong. Insufficient memory
capacity.
2. Duplex setting is set for a single surface
model.
Cause
1. The memory capacity on the MCU PWB is
wrong.
2. Setting for a single surface model is wrong.
Check
1. Use SIM26-39 to check to confirm that the
and
memory capacity is 128MB. If it is not
remedy
128MB, replace the MCU PWB.
2. If SIM26-04 is set to 1, change the setting to
0. If it is 0, replace the MCU PWB.
Details of trouble
MX-M182 TROUBLE CODE LIST 8-2
Main
Sub
code
code
E7
02
Content
LSU trouble
Detail
The BD signal from the LSU cannot be
detected in a certain cycle. (Always OFF or
always ON)
Cause
LSU connector or LSU harness defect or
disconnection
Polygon motor rotation abnormality
Laser beams are not generated.
MCU PWB abnormality.
Check
Check connection of the LSU connector.
and
Execute SIM 61-03 to check the LSU
remedy
operations.
Check that the polygon motor rotates normally.
Replace the LSU unit.
Replace the MCU PWB.
06
Content
Image data decode error
Detail
Image expansion error
Cause
MCU PWB abnormality
USB cable trouble
Check
Replace the MCU PWB.
and
Replace the USB cable.
remedy
10
Content
Shading trouble (Black correction)
Detail
The CCD black scan level is abnormal when
the shading.
Cause
Improper connection of the CCD unit flat cable
CCD unit abnormality
MCU PWB abnormality.
Check
Check connection of the CCD unit flat cable.
and
Check the CCD unit.
remedy
11
Content
Shading trouble (White correction)
Detail
The CCD white scan level is abnormal when
the shading.
Cause
Improper connection of the CCD unit flat cable
Dirt on the mirror, the lens, and the reference
white plate
Copy lamp lighting abnormality
CCD unit abnormality
MCU PWB abnormality
(When occurred in the SPF scan position.)
Improper installation of the mirror unit
Check
Clean the mirror, the lens, and the reference
and
white plate.
remedy
Check lighting and the light quantity of the copy
lamp (SIM05-03).
Check the CCD unit.
Check the MCU PWB.
16
Content
Abnormal laser output
Detail
When the laser output is stopped, HSYNC is
detected.
Cause
Laser abnormality
MCU PWB abnormality.
Check
Replace the LSU.
and
Replace the MCU PWB.
remedy
91
Content
Decode error (FAX print)
Detail
When image data sent from the FAX board to
the machine are judged as decode error:
Cause
Connector connection trouble
MCU PWB abnormality
Check
Turn OFF/ON the power.
and
Connect the connector again.
remedy
Replace the MCU PWB.
Details of trouble
Advertisement
