Advertisement
Main
Sub
code
code
22
01
Counters display
Sim22-1 COUNTER 1/4
TOTAL
MAINTE
DEV
DRUM
key
Sim22-1 COUNTER 2/4
CPY JOB : nnnnnnn
PRT JOB : nnnnnnn
SCN JOB : nnnnnnn
OC SCN
key
Sim22-1 COUNTER 3/4
SPF
DUPLEX
OTHERS : nnnnnnn
MNTCYC : nnnnnnn
key
Sim22-1 COUNTER 4/4
DEV TTL
DRM TTL : nnnnnnn
Though SIM26-74 is set to "1: Scan counter is added," the count is not added to SIM22-01 total counter
display. The setting affects only the total counter display in the system settings.
03
Jam memory display
Used to check the jam kind occurred in the main unit and the SPF/RSPF.
The kinds of jams up to 30 items are displayed sequentially from the latest one. (The oldest one is deleted
sequentially.) This display is used for troubleshooting. (If there are extremely many troubles in a position, it
may be judged that a repair must be executed.)
The kinds and contents of jams to be displayed are as follows.
Sim22-3 JAM HIS. 1/4
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
key
Sim22-3 JAM HIS. 2/4
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
key,
key: Switches to another page.
04
Jam total counter display
Used to display the jam total counter.
Sim22-4 COUNTER
JAM
:
:nnnnnnn
:nnnnnnn
:nnnnnnn(*)
:nnnnnnn
key
Counter display
TOTAL
: Total counter
MAINTE : Maintenance counter
DEV
: Development counter
: nnnnnnn
DRUM
: Drum counter
CPY JOB : Copy job counter
PRT JOB : Print job counter
key
SCN JOB : Scan job counter
OC SCN : OC scan counter
SPF
: SPF/RSPF counter
: nnnnnnn
DUPLEX : DUPLEX counter
: nnnnnnn
OTHERS : Other counter
MNTCYC : Maintenance cycle
DEV TTL : Development rotation accumulated time
DRM TTL : Drum rotation accumulated time
key
: nnnnnnn
Kinds of jams and display contents
SPPD_ON
: SPF paper entry sensor (Not reached)
SPPD_OFF : SPF paper entry sensor (Remaining)
SOUT_ON : SPF paper exit sensor (Not reached)
SOUT_OFF : SPF paper exit sensor (Remaining)
POUT_ON : Paper exit sensor (Not reached)
POUT_OFF : Paper exit sensor (Remaining)
DPX_ON
: DUP sensor (Not reached)
key
DPX_OFF
: DUP sensor (Remaining)
PIN_ON
: Paper feed sensor (Not reached)
PIN_OFF
: Paper feed sensor (Remaining)
PIN2_ON
: Cassette 2 paper feed sensor (Not reached)
PIN3_ON
: Cassette 3 paper feed sensor (Not reached)
PIN4_ON
: Cassette 4 paper feed sensor (Not reached)
nnnnnn
MX-M182 SIMULATIONS 7-13
Contents
Remark
Advertisement
