Advertisement
2. Internal
19
20
19 Toner cartridge lock release lever
20 Toner cartridge
21 Document feeder tray (when the SPF/
RSPF is installed)
22 Original guides (when the SPF/RSPF is
installed)
23 Feeding roller cover (when the SPF/
RSPF is installed)
24 Right side cover (when the SPF/RSPF is
installed)
25 Fusing unit release levers
26 Roller rotating knob
27 Exit area (when the SPF/RSPF is
installed)
28 Photoconductive drum
29 Fusing unit paper guide
Warning: The fusing unit is hot. Do not touch the fusing unit when removing misfeed paper. Doing so may cause a burn or injury.
Do not touch the photoconductive drum (green portion) when removing the misfeed paper. Doing so may damage the drum and cause
smudges on copies.
Note: The model name is on the front cover of the machine.
21 22
26
25
To replace the toner cartridge, pull out the toner cartridge while pushing on this lever.
Contains toner.
Place the original(s) that you wish to scan face up here. Up to 40 sheets can be placed.
Adjust to the size of the originals.
Open to remove misfeed originals.
Open to remove misfeed originals.
To remove the paper misfeed in the fusing unit, push down on these levers and remove the paper.
Rotate to remove misfeed paper.
Originals exit the machine here after copying/scanning when the SPF/RSPF is used.
Images are formed on the photoconductive drum.
Open to remove misfeed paper.
MX-M182 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-2
23
24
27
28
29
Advertisement
