Sharp MX-M182 Service Manual page 104

Result code Communica-
(Communica- tion report
tion result) result column
64 F code is not
accepted.
67 F code
password
discrepancy
68 BOX NO. NG
69 Memory over
• When communication result is OK, the communication result sub code
1 and sub code 2 are 0000.
• < > indicates the communication means. <Send>, send; <Receive>,
receive; <Poll>, polling; <Bulletin>, bulletin board
The status code from the modem in V.34 mode is indicated with the com-
munication result sub code 1 (top 2 digits). However, the communication
sub code 1 is 00 in communication other than V.34 mode.
< Communication result sub code >
Result
Communication interruption content
code 2
02 EOL time over
03 Carrier detection time over
06 Memory image decoding error
07 Memory image decoding error
08 Time up between frames in phase C
11 Polarity reversion detection
12 Invalid command reception
13 Time over (1min timer/6sec timer)
14 PUT error
15 In V.34 mode, time up is generated
when shifting from Primary to Control.
16 In V.34 mode, time up is generated
when shifting from Control to Primary.
20 Polarity reversion detection
21 Invalid command reception
22 Fall back retry number over
23 Resend over of the number of times of
command retry
24 Time over (T5 timer)
25 Time over (T5 timer) in V.34 mode
26 Time over occurrence during shift from
Primary to Control in V.34 mode
28 Modem chip answering NG
Communication interruption
content
When F code is transmitted,
<Send>
1) When DCN is received for
SUB, check the BOX number.
2) When DCN is received for SID,
check BOX number and the
pass code.
When F code is received,
<Receive>
When the F code relay broadcast
function or the F code confidential
reception function is inhibited with
soft switches.
When the pass code (SID) does
not coincide in F code reception,
<Receive>
When a BOX number that is not
registered is instructed (SUB
discrepancy) in F code reception,
<Receive>
Memory over in quick online
sending
Transmission/
Reception
Reception
Reception
Reception
Transmission
Transmission/
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Transmission
Transmission
Transmission
Transmission
Transmission
Transmission
Transmission
Transmission/
Reception
MX-M182 TROUBLE CODE LIST 8-8