Advertisement
Main
Sub
code
code
41
01
Document size detection photo sensor check
Used to check the operation of the document sensor.
When this simulation is executed, the status of the document sensor is displayed.
An active sensor display is highlighted.
Sim41-1 PD SENSOR
OCSW
PD1
PD3
PD4
OC cover open/close sensor status
OCSW
*
For AB series, PD1-PD5; for inch series, PD1 - PD4.
02
Document size detection photo sensor detection level adjustment
When this simulation is executed, the detection level of the OC document size detection sensor is displayed.
(Real time display)
Place white paper of A3 or WLT on the document table and press [OK] key or [START] key with the OC
cover open.
When [START] key is pressed, "EXEC" is highlighted and the document detection level at that moment is
saved in the EEPROM. (The saved value is used as the reference for the following document size detection
control.)
Execution window
Sim41-2 PD SENSOR
OCS
1[128] 200
3[128] 200
5[128] 200
The values are displayed in the range of 0 - 255.
0 (Black) - 255 (White)
The value in [ ] indicates the adjustment threshold value. "EXEC" is highlighted during execution.
03
Document size detection photo sensor light receiving/detection level check
When this simulation is executed, the light receiving level of the document detection photo sensor is
displayed. (Real time display)
The values in parentheses of sensor 4 and 5 are the threshold values of adjustment at SIM41-04. Since
sensors 1 and 3 are not provide with the threshold value of detection at SIM41-04, "0" is always displayed.
Sim41-3 PD SENSOR
OCS
1[000] 200
3[000] 200
5[050] 200
04
Detection level adjustment when the document size is settled (15 degrees - 20 degrees)
Set the OC cover to the document size settled state (15 degrees - 20 degrees), and press [OK] key.
1 Initial window
Sim41-4 20 SENSOR
PRESS OK KEY EXEC
The detection level under the document size settled state is saved in the EEPROM, and the value is
displayed in [ ].
*
The document size settled state means the point when the open/close sensor (OCSW) is switched from
ON (highlighted) to OFF (normal display).
PD2
PD5
Open
Close
Highlighted
Normal display
Sensor position for AB series
2[128] 200
1
4[128] 200
2
3
OCSW
Original cover status
Open: Highlighted
Close: Normal display
1 - 5
PD sensor detection level
2[000] 200
4[050] 200
MX-M182 SIMULATIONS 7-27
Contents
Document sensor status
PD1 - PD5
Document NO Document
Normal display Highlighted
Sensor position for Inch series
5 4
1
2
2 After-execution window
Sim41-4 20 SENSOR
OCS
1[000] 163
2[000] 148
3[001] 167
4[0C6] 180
5[197] 179
YES
4 3
Remark
Advertisement
