Advertisement
Main
Sub
code
code
25
10
Polygon motor operation check
When [OK] key or [START] is pressed, the polygon motor is rotated for 30sec.
(Execution start window)
Sim25-10 LSU CHECK
PRESS OK KEY EXEC
After completion of the process, the machine shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Interrupts the output operation, and shifts to the sub code input window.
26
01
Job separator setting
Used to set YES/NO of installation of the hob separator.
After installation of the job separator, setting must be manually set to YES.
Sim26-1 JBS SET
1:JOB SEPARATOR
0=NONE
1=SEPARATOR
[ 0-1]
[CA] key: Exits the simulation mode. (When setting is changed, the machine exits the simulation mode and
performs the hard reset.)
[INTERRUPT] key: Shifts to the sub code input window. (When setting is changed, it is invalid.)
[START] key: Setting contents are saved in the EEPROM and the machine shifts to the code input window.
02
Size setting
Used to set Enable/Disable of FC (8.5" x 13") size detection and mexican legal size detection.
Window display
1: B4/LG, FC
2: Use Mex Legal
Detection size when FC (8.5" x 13") size and mexican legal size document is used.
Document SPF
* For destinations other than the above, this setting is invalid.
Sim26-2 SIZE SET
1:B4/LG,FC
2:Use Max Legal
[ 0-1]
[OK] key or [START] Key
0 : No job separator
1 : Job separator provided
0
0
(When setting is changed, the machine does not shift to the code input window.)
Code number
0
FC detection disable (The set values to items marked with
are ignored.)
1
(Follows the setting of items below marked with
0
Mexican legal detection disable (FC detection enable)
1
Mexican legal detection enable (FC detection disable)
Unit to
Destination
Destination
be used
EX Japan AB
FC(8.5"x13") B4
series (FC)
B4
Inch series
FC(8.5"x13") LG
(FC)
LG(8.5"x14")
Code: Setting
0 : Detection disabled
0
1 : FC detection enabled
0
0
MX-M182 SIMULATIONS 7-19
Contents
(Execution window)
Sim25-10 LSU CHECK
EXEC
Setting
Detection size
1: B4/LG,
1: B4/LG, FC
FC: 0
2: Use Mex
Legal: 0
FC
(8.5"x13")
(8.5"x14")
.)
2: Use Mex
Legal: 1
Mexican legal
(8.5"x13.4")
Remark
Advertisement
